Welcome. Register now to see your pricing.
Close
Danfoss® - H353H Truck Hose, 5/8-12" ID, 1-5/64" OD, 50' Length, 2.75" Bend Radius, 750PSI Working Pressure, SAE 100R5, SAE J1402 Type II (50 Feet)
Representative Image Only
Documents
50-ft. lengths consist of no more than two pieces with none shorter than 10 feet. Total length may vary from 45 to 60 feet.
• Agency Ratings: SAE 100R5 SAE J1402 Type 3 (-4 through -12 only) D.O.T. A II ABS
• Fittings Certified: 069 E-Series (except -40); 247 N-Series (sizes -4 through -16)
• Agency Approvals: None
• Construction:
– Inner Tube: Nitrile
– Reinforcement: One fiber braid, one steel braid
– Cover: One fiber braid
• Temperature Range:
– Hydraulic: –40°F to +212°F (–40°C to +100°C)
– Air Brake: –40°F to +200°F (–40°C to 93°C)
– Hot Oil: –40°F to +250°F (–40°C to 121°C)
• Application Notes:
– General-purpose truck and hydraulic hose
– For use in air brake, fuel and grease lines, high-temperature petroleum oils. and medium-pressure hydraulic applications
– -16 through -40 sizes are not SAE or D.O.T. approved for air brake applications
Note: When using T-420 or T-480 crimpers, use Adapter Die Ring T-420-25 (Item No. 63689) and Series T-400 Spacer Rings. When using ET4000/4001 crimpers, use Adapter Die Ring T-410-25 (Item No. 63782) and Series T-410 Spacer Rings.
50-ft. lengths consist of no more than two pieces with none shorter than 10 feet. Total length may vary from 45 to 60 feet.
• Agency Ratings: SAE 100R5 SAE J1402 Type 3 (-4 through -12 only) D.O.T. A II ABS
• Fittings Certified: 069 E-Series (except -40); 247 N-Series (sizes -4 through -16)
• Agency Approvals: None
• Construction:
– Inner Tube: Nitrile
– Reinforcement: One fiber braid, one steel braid
– Cover: One fiber braid
• Temperature Range:
– Hydraulic: –40°F to +212°F (–40°C to +100°C)
– Air Brake: –40°F to +200°F (–40°C to 93°C)
– Hot Oil: –40°F to +250°F (–40°C to 121°C)
• Application Notes:
– General-purpose truck and hydraulic hose
– For use in air brake, fuel and grease lines, high-temperature petroleum oils. and medium-pressure hydraulic applications
– -16 through -40 sizes are not SAE or D.O.T. approved for air brake applications
Note: When using T-420 or T-480 crimpers, use Adapter Die Ring T-420-25 (Item No. 63689) and Series T-400 Spacer Rings. When using ET4000/4001 crimpers, use Adapter Die Ring T-410-25 (Item No. 63782) and Series T-410 Spacer Rings.
† May Require Additional Delivery Time to Canada
