Welcome. Register now to see your pricing.

Close

  • Customer Service

    Customer Service

    866.837.9908
    Mon - Fri: 7:00am - 5:00pm CT

    Contact Us 

    FAQs

  • Quick Order

    Enter Items Below

Tru-Shrink Heat Shrink Tubing 1 to 250 MCM Black

Tru-Shrink Heat Shrink Tubing, 1 to 250 MCM, Black, 1" Diameter, 6" Length, 1" ID Before and 0.5" ID After Shrinkage (Pack of 10) 

Item#: 61662

Price: Log In

Standard Pack: 10   ea.

Ship Weight: 0.2

Catalog Page#:17-35

Usually Ships: Today

Quantity:
Check Stock
Add to List

• 2:1 shrink ratio
• Easily assembled over components, connectors or other irregular shapes
• Flame-retardant
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
• Tensile strength: 1,500 PSI
• Elongation: 200%
• Dielectric strength: 500V/mil
• Volume resistivity: 1015 Ohm/cm
• Heat shock: Four hours at 482°F (250°C)
• Low temperature flexibility: Four hours at –67°F (–55°C)
• Longitudinal change: Less than 5%
• Secant modulus: 12,000 PSI
• Rated at 600V
• Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

61662
Tru-Shrink Heat Shrink Tubing 1 to 250 MCM Black
1-250 MCM AWG
1 "
6 "
Black
1.00 "
0.500 "
0.035 "
500 V/mm
600 V
200 %
1500 PSI
4 hours at 482 degrees F
12,000 PSI
Less than 5%
CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements
Tru-Shrink Thin Wall Heat Shrink
Heat Shrink Tubing
39121723
No

Description

• 2:1 shrink ratio
• Easily assembled over components, connectors or other irregular shapes
• Flame-retardant
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
• Tensile strength: 1,500 PSI
• Elongation: 200%
• Dielectric strength: 500V/mil
• Volume resistivity: 1015 Ohm/cm
• Heat shock: Four hours at 482°F (250°C)
• Low temperature flexibility: Four hours at –67°F (–55°C)
• Longitudinal change: Less than 5%
• Secant modulus: 12,000 PSI
• Rated at 600V
• Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

Tech Specs

61662
Tru-Shrink Heat Shrink Tubing 1 to 250 MCM Black
1-250 MCM AWG
1 "
6 "
Black
1.00 "
0.500 "
0.035 "
500 V/mm
600 V
200 %
1500 PSI
4 hours at 482 degrees F
12,000 PSI
Less than 5%
CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements
Tru-Shrink Thin Wall Heat Shrink
Heat Shrink Tubing
39121723
No
Back to Top