Welcome. Register now to see your pricing.

Close

  • Customer Service

    Customer Service

    866.837.9908
    Mon - Fri: 7:00am - 5:00pm CT

    Contact Us 

    FAQs

  • Quick Order

    Enter Items Below

Tru-Shrink Heat Shrink Tubing 12 to 10 AWG Black

Tru-Shrink Heat Shrink Tubing, 12 to 10 AWG, Black, 5/16" Diameter, 8' Length, 0.312" ID Before and 0.156" ID After Shrinkage (Pack of 1) 

Item#: 51199

Price: Log In

Standard Pack: 1   ea.

Ship Weight: 0.11

Catalog Page#:17-35

Usually Ships: Today

Quantity:
Check Stock
Add to List

• 2:1 shrink ratio
• Easily assembled over components, connectors or other irregular shapes
• Flame-retardant
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
• Tensile strength: 1,500 PSI
• Elongation: 200%
• Dielectric strength: 500V/mil
• Volume resistivity: 1015 Ohm/cm
• Heat shock: Four hours at 482°F (250°C)
• Low temperature flexibility: Four hours at –67°F (–55°C)
• Longitudinal change: Less than 5%
• Secant modulus: 12,000 PSI
• Rated at 600V
• Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
• Handy dispenser holds tubing in place for easy cutting – eliminates waste
• Convenient storage keeps tubing clean and takes little space – clear shell permits visual stock check
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

51199
Tru-Shrink Heat Shrink Tubing 12 to 10 AWG Black
12-10 AWG
5/16 "
8 ft
Black
.312 "
.156 "
.025 "
500 V/mm
600 V
200 %
1500 PSI
4 hours at 482 degrees F
12,000 PSI
Less than 5%
CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements
Black 8-ft. Lengths with Dispenser
Heat Shrink Tubing
39121723
No

Description

• 2:1 shrink ratio
• Easily assembled over components, connectors or other irregular shapes
• Flame-retardant
• Non-corrosive
• Non-nutrient – fungus resistant
• Excellent fluid resistance
• Meets or exceeds MIL-1-23053 D/5, Class I, II and III; AMS 3636C and AMS 3637B requirements
• Tensile strength: 1,500 PSI
• Elongation: 200%
• Dielectric strength: 500V/mil
• Volume resistivity: 1015 Ohm/cm
• Heat shock: Four hours at 482°F (250°C)
• Low temperature flexibility: Four hours at –67°F (–55°C)
• Longitudinal change: Less than 5%
• Secant modulus: 12,000 PSI
• Rated at 600V
• Use as electrical insulation over cable splices and terminations, and for wire harness covering, bundling and wire marker identification
• Handy dispenser holds tubing in place for easy cutting – eliminates waste
• Convenient storage keeps tubing clean and takes little space – clear shell permits visual stock check
Wire gauge coverage is approximate due to the wide variance of wire thicknesses.

Tech Specs

51199
Tru-Shrink Heat Shrink Tubing 12 to 10 AWG Black
12-10 AWG
5/16 "
8 ft
Black
.312 "
.156 "
.025 "
500 V/mm
600 V
200 %
1500 PSI
4 hours at 482 degrees F
12,000 PSI
Less than 5%
CSA, UR and Meets or exceeds MIL-1-23053 D/5, Class I, II and II; AMS 3636C and AMS 3637B requirements
Black 8-ft. Lengths with Dispenser
Heat Shrink Tubing
39121723
No
Back to Top